Results 1 to 4 of 4

Thread: 1968 Fender Pro Reverb Circuit

  1. #1
    Forum Member
    Join Date
    Feb 2024
    Location
    Port Orange, FL
    Posts
    2

    1968 Fender Pro Reverb Circuit

    I recently purchased a 1968 Fender Pro Reverb and was wondering what circuit it might have.
    The chassis is dated 1965 . choke and output transformer is dated late 1967. Would all the earlier 68 models have the AA165 circuit. Unfortunately the tube chart is ripped off the inside so I can't tell. Thanks

  2. #2
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,332

    Re: 1968 Fender Pro Reverb Circuit

    The AA165 circuit was replaced by the AB668 revision in June of '68. Check your chassis closely for signs of an ink-stamped assembly date near the power tranny.
    "When injustice becomes law then rebellion becomes duty."

  3. #3
    Forum Member
    Join Date
    Feb 2024
    Location
    Port Orange, FL
    Posts
    2

    Re: 1968 Fender Pro Reverb Circuit

    I looked but could not find it but at least I know it's one of the 2. I'll just print both. Going to my amp tech who has worked on many of my amps before. Including a 68 pro reverb I sold in 2008. The previous owner just replaced rectifier tube weber WU4GB solid state one. The Weber sight says it is a replacement for the 5U4GB but the amp I have called for a GZ34 so I bought a GZ34 I want to use. I've read where they draw different currents so I want to make sure I have the right tube. Going to have the amp tech go through the amp .

  4. #4
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,332

    Re: 1968 Fender Pro Reverb Circuit

    Both the AA165 and the AB668 are designed to use the GZ34 rectifier.
    "When injustice becomes law then rebellion becomes duty."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •